HSP 94166 RC Car 1/10 Scale 4WD Nitro Gas Powered Off-Road Buggy Truck Vehicle
The HSP-94166 is a 1/10 scale shaft driven 4WD off road nitro buggy which comes 100% assembled and ready to run.
This new Two Speed Automatic Transmission gives huge acceleration and 100kph top speed.
This model has a strong, reliable and very Powerful 18CXP pull start nitro engine.
-Two Speed Transmission
-4 Wheel Drive System with 18CXP Engine
-Front and Rear Leak Proof Differential with Metal Bevel Gears
-2.5mm 6061/T6 Anodized Aluminum Chassis
-Lightweight Aluminum Flywheel (13.8g) provides quick engine response.
-Sealed Battery and Receiver Box
-Fully ball Raced
-Powerful Disk Brake System with replaceable pads
-75cc Leak Proof Fuel Tank with Overflow pipe and spring loaded fill cover
-Four adjustable Oil filled aluminum capped shock absorbers
-Differentials with 5 screws providing quick maintenance
-High flow dual element air filter
-High Performance Off Road Knobbly Tyres
-High Quality power silencer and regulated fuel tank vent
-Pivot Ball Suspension
-Fully upgradeable with aluminum parts
-Gear Ratio: 1:5.84(L)1:8.58(H)
-Ground Clearance: 26mm
-Radio System: 2CH 2.4G
-Chassis Type: 2.5mm aluminum 6061
-Wheels: 86*32(F) 86*40mm(R)
-Shocks: 4 Oil filled aluminum capped speed control
What's in the box:
-1x 1/10 Scale Buggy
-1x 2.4G Transmitter
What you'll need:
-Glow plug igniter
-Nitro fuel 16% or 20%
-8 x AA Batteries
Nitro Gas RC Car Starting Attention:
-Glow: Be sure that your glow plug igniter is charged and your glow plug is in good condition. Be sure that your glow plug will stay lit for 10+ seconds.
-Pull starter: Please pull the start cord correctly when firstly starting as the pull starter is a easy-worn part.
-Novice: If you are a Nitro Gas RC car novice, we recommend that you should get help with setting and running from our customer service representative in first time