Features:
.As a strong climbing car model, this car is mainly designed for extreme climbing performance. The structure has been greatly upgraded. Ackerman steering angle, full car metal gears, metal spools, ultra-long wheelbase and reduction gearbox output the shaft reverse drive design is the biggest feature of this car.
.The reduction gearbox reverse drive effectively solves the phenomenon of the body axle effect of the car during starting and climbing.
.The left and right swing stroke of the body can reach 50 degrees, the vehicle will not roll over within 55 degrees of sideways driving, the vertical suspension stroke reaches 40mm, and the maximum waist twist stroke reaches 71mm.
.The one-piece axle structure and the extra-large all-terrain tires make the climbing performance stronger.
.In addition, this car also has a lot of room for modification
.RTR version, 2.4G remote control receiving system, "HobbyWing" 60A waterproof ESC, 15KG metal gear steering gear with metal steering gear arm.
.All metal gear reduction gearbox, transmission system front and rear reverse 4-wheel drive design.
.Integrated 3mm 6061 aluminum alloy chassis with angles and holes.
.The one-piece axle box is equipped with all-metal gears, the entire vehicle bearing arrangement and the front steering CVA structure design.
.The 6mm diameter solid steel tie rod treated by electroplating process has the advantages of wear resistance and counterweight.
.Large-stroke all-metal hydraulic shock absorber.
.The 145mm diameter all-terrain simulation wheels and super soft grip anti-skid tires can make the car easily climb straight up slopes of more than 48 degrees.
.RC550 high-performance carbon brush motor can choose different sizes of pinion gears, and adjust the gear ratio according to different requirements.
.With its superior climbing performance, this car stands out among many climbing cars, and is very suitable for RC model car players and enthusiasts to play.
.The car shell is available in gray, blue, and green.
.We provide professional pre-sales consultation and after-sales service, please feel free to contact us if you have any questions.
.For Ages: 14+
Specifications:
.Material: Plastic + Hardware + Rubber
.Model: 18100
.Ratio: 1:10
.Wheelbase: 285mm
.Ground Clearance: 95mm
.Gear Ratio: 36.9:1
.Motor: RC550 17T brushed motor
.ESC: HobbyWing 1060 60A waterproof ESC
.Servo: 15KG all metal gear waterproof servo
.Remote Control: 2.4GHz/4 channel remote control
.Remote Control Distance: more than 100 meters
.Remote Control Battery: 4 x AA (not included)
.Power Battery: 7.2V 2000mAh Ni-Mh battery.
.Product Dimensions: 51.1 x 29.5 x 25.5cm
.Product Weight: 2760g
.Package Dimensions: 60 x 35 x 30cm
.Package Weight: 3500g
.Packing: Graphic Carton
Package Content:
.1 x RC Car
.1 x Remote Control
.1 x Charger
.1 x Instruction Book
.As a strong climbing car model, this car is mainly designed for extreme climbing performance. The structure has been greatly upgraded. Ackerman steering angle, full car metal gears, metal spools, ultra-long wheelbase and reduction gearbox output the shaft reverse drive design is the biggest feature of this car.
.The reduction gearbox reverse drive effectively solves the phenomenon of the body axle effect of the car during starting and climbing.
.The left and right swing stroke of the body can reach 50 degrees, the vehicle will not roll over within 55 degrees of sideways driving, the vertical suspension stroke reaches 40mm, and the maximum waist twist stroke reaches 71mm.
.The one-piece axle structure and the extra-large all-terrain tires make the climbing performance stronger.
.In addition, this car also has a lot of room for modification
.RTR version, 2.4G remote control receiving system, "HobbyWing" 60A waterproof ESC, 15KG metal gear steering gear with metal steering gear arm.
.All metal gear reduction gearbox, transmission system front and rear reverse 4-wheel drive design.
.Integrated 3mm 6061 aluminum alloy chassis with angles and holes.
.The one-piece axle box is equipped with all-metal gears, the entire vehicle bearing arrangement and the front steering CVA structure design.
.The 6mm diameter solid steel tie rod treated by electroplating process has the advantages of wear resistance and counterweight.
.Large-stroke all-metal hydraulic shock absorber.
.The 145mm diameter all-terrain simulation wheels and super soft grip anti-skid tires can make the car easily climb straight up slopes of more than 48 degrees.
.RC550 high-performance carbon brush motor can choose different sizes of pinion gears, and adjust the gear ratio according to different requirements.
.With its superior climbing performance, this car stands out among many climbing cars, and is very suitable for RC model car players and enthusiasts to play.
.The car shell is available in gray, blue, and green.
.We provide professional pre-sales consultation and after-sales service, please feel free to contact us if you have any questions.
.For Ages: 14+
Specifications:
.Material: Plastic + Hardware + Rubber
.Model: 18100
.Ratio: 1:10
.Wheelbase: 285mm
.Ground Clearance: 95mm
.Gear Ratio: 36.9:1
.Motor: RC550 17T brushed motor
.ESC: HobbyWing 1060 60A waterproof ESC
.Servo: 15KG all metal gear waterproof servo
.Remote Control: 2.4GHz/4 channel remote control
.Remote Control Distance: more than 100 meters
.Remote Control Battery: 4 x AA (not included)
.Power Battery: 7.2V 2000mAh Ni-Mh battery.
.Product Dimensions: 51.1 x 29.5 x 25.5cm
.Product Weight: 2760g
.Package Dimensions: 60 x 35 x 30cm
.Package Weight: 3500g
.Packing: Graphic Carton
Package Content:
.1 x RC Car
.1 x Remote Control
.1 x Charger
.1 x Instruction Book