Stark Music Tesla Coil One Full-bridge Drsstc 60CM Arc Experimental Toy High-tech Toy
Features:
.This model is a full-bridge Tesla coil, which has higher power and better viewing effect, while reducing the operation steps, without grounding wire, and convenient to use.
.The dual totem phase-shift drive is adopted to achieve low delay, high efficiency, and effectively prevent the explosion of tubes.
.The coil diameter and length are calculated accurately, and the resonant frequency is fixed to 200KHZ.
.Use 0.2mm oxygen-free copper enameled wire to reduce resistance and heat generation, which can be used for a long time.
.The arc extinguishing module has its own battery, no charger or USB power supply is required, and the operation is simple.
.Technical Points: Dual totem phase-shifting driver board; full bridge power circuit; optical fiber signal transmission; drive arc extinguishing isolation design; groundless design; 220V power supply; 60cm arc discharge distance; 3.5mm audio interface.
.How to Use: (1) First assemble the coil and equalizing ring according to the instructions, only need to tighten the screws. (2) Fix the discharge needle at the top of the equalizing ring. (3) Connect the arc extinguishing module and main body of the product with optical fiber line. (4) Turn on the arc extinguishing module and check whether it works normally. If it works, turn the knob counterclockwise to the end, and then close the arc. (5) After connecting the 220V power supply to the main body, it can be used. The safety distance of the equipment is more than 2-3 meters. (6) Adjust the frequency and knob to reach the required arc length.
.Note: (1) For the sake of transportation safety, remove the coil and equalizing ring when shipping, and be sure to assemble it according to the instructions after receipt. (2) Do not directly touch the coil or equalizing ring at any time after the product is powered on. (3) The product safety distance should be at least 2-3 meters, and the distance for patients with diseases should be more than 8 meters. (4) It is recommended to suspend use for about 10 minutes of continuous high-power use, and wait for the product to cool down. If low-power use can extend the use time. (5) Make sure that the arc extinguishing potentiometer is at position 0 when opening or closing.
.Value: This product can be used for science and technology museum display, teaching demonstration, and can also be used as a high-tech toy for high-end enthusiasts. It is magical and fun, inspiring learning enthusiasm and interest in scientific exploration, and cultivating innovation and creativity.
.For Ages: 14+
Specifications:
.Color: As Shown
.Material: Metal + Acrylic + Electronic Components
.Product Dimensions: 20 x 20 x 54cm
.Product Weight: 8000g
.Package Dimensions: 60 x 25 x 25cm
.Package Weight: 11000g
.Packing: Carton Box
Package Content:
.1 x Tesla Coil
Features:
.This model is a full-bridge Tesla coil, which has higher power and better viewing effect, while reducing the operation steps, without grounding wire, and convenient to use.
.The dual totem phase-shift drive is adopted to achieve low delay, high efficiency, and effectively prevent the explosion of tubes.
.The coil diameter and length are calculated accurately, and the resonant frequency is fixed to 200KHZ.
.Use 0.2mm oxygen-free copper enameled wire to reduce resistance and heat generation, which can be used for a long time.
.The arc extinguishing module has its own battery, no charger or USB power supply is required, and the operation is simple.
.Technical Points: Dual totem phase-shifting driver board; full bridge power circuit; optical fiber signal transmission; drive arc extinguishing isolation design; groundless design; 220V power supply; 60cm arc discharge distance; 3.5mm audio interface.
.How to Use: (1) First assemble the coil and equalizing ring according to the instructions, only need to tighten the screws. (2) Fix the discharge needle at the top of the equalizing ring. (3) Connect the arc extinguishing module and main body of the product with optical fiber line. (4) Turn on the arc extinguishing module and check whether it works normally. If it works, turn the knob counterclockwise to the end, and then close the arc. (5) After connecting the 220V power supply to the main body, it can be used. The safety distance of the equipment is more than 2-3 meters. (6) Adjust the frequency and knob to reach the required arc length.
.Note: (1) For the sake of transportation safety, remove the coil and equalizing ring when shipping, and be sure to assemble it according to the instructions after receipt. (2) Do not directly touch the coil or equalizing ring at any time after the product is powered on. (3) The product safety distance should be at least 2-3 meters, and the distance for patients with diseases should be more than 8 meters. (4) It is recommended to suspend use for about 10 minutes of continuous high-power use, and wait for the product to cool down. If low-power use can extend the use time. (5) Make sure that the arc extinguishing potentiometer is at position 0 when opening or closing.
.Value: This product can be used for science and technology museum display, teaching demonstration, and can also be used as a high-tech toy for high-end enthusiasts. It is magical and fun, inspiring learning enthusiasm and interest in scientific exploration, and cultivating innovation and creativity.
.For Ages: 14+
Specifications:
.Color: As Shown
.Material: Metal + Acrylic + Electronic Components
.Product Dimensions: 20 x 20 x 54cm
.Product Weight: 8000g
.Package Dimensions: 60 x 25 x 25cm
.Package Weight: 11000g
.Packing: Carton Box
Package Content:
.1 x Tesla Coil