TFL 1106 Pursuit RC Boat V-Shaped O Boat Model ARTR with 3660/1620KV Motor and 120A ESC - Carbon Fiber Power Version(No Servo, Controller, Battery and Charger)
Features:
.Battery Motor Integration: Motor and shaft support can be upgraded according to the situation to improve performance. Easy to maintain. Remove the shaft bracket and clean the soft shaft refueling and others.
.Integrated Design: Improved the previous ship need to remove glue and cloth before installing the electric rack, so as to save the ship space, reduce the weight of the ship, avoid deformation of hull.
.Convenience: Reasonable shaft support design, soft shaft shortening for small shaking and excellent transmission efficiency.
.Warm Tips: This ship is an ARTR version, excluding servo, remote control, battery and charger. You need to prepare for yourself.
.Notice: First of all, before launching the model ship, it is necessary to check whether the screws in each part are locked and ensure that they are not loose, and check whether the transmission system maintains sufficient lubricating oil. Check whether the cooling water pipe is unblocked. When debugging remote control and testing electronic equipment, motor idling should not exceed 10 seconds. After the model ship is launched, it should be observed closely whether there is water discharge at the outlet on the side of the ship. If there is water discharge, the cooling system is normal. The next step is to fly your boat with the waves. Conversely, if there is no drainage, the cooling system needs to be checked immediately. After the ship model is used, please clear the water in the hold timely to ensure the interior is dry, so as to avoid damage to electronic equipment. Focus on cleaning the water in the transmission system, and apply anti-rust lubricating oil so that is can be stored for a long time
.For over 14-year-old.
Recommended(Not Included):
.Servo: S3003 3KG Servo
.Remote Control: FS-GT2E, FS-GT3B 2-channel and above Remote Control
.Battery: 14.8V 4000mAh 30C Li-PO or Higher Capacity
.Charger: Lithium Battery Balance Charger
Specifications:
.Color: As Shown
.Material: Carbon Fiber
.Hull Design: V-Shaped(O Yacht)
.Motor: 3660/1620KV
.ESC: 120A
.Drive Shafting: 4.76mm
.Rudder Bracket: 68mm
.Rudder: 130
.Cement Pressure Board: 57mm
.Water Jet: 25mm
.Copper Propeller: 5B12 x 42
.Product Size: 82 x 24 x 16cm
.Product Weight: 1730g
.Package Dimensions: 85 x 28 x 20cm
.Package Weight: 3600g
.Packing: Box
Package Content:
.1Set x Boat